Suitability:
The TP 200 PTO is the handyman of tractor-mounted wood-chippers, it can handle most jobs that you will need on a 40-115hp tractor.
Features:
- Tractor-mountable
- Hydraulically-fed disc chipper
- Three knives and three anvils in Hardox 400
- Wood chipping of branches and entire trees up to 200mm
- Cut at an angle of 90 degrees
- TP Pilot stress control
For more products and accessories, visit the Linddana website 
Usability:
Sometimes the best chipper is the one that is the most versatile. The TP 200 PTO does everything you need from a small scale mobile wood chipper, eating up to 200mm branches and trees, and its for this reason that its Linddana’s best selling model.
| Technical Data | |
| Max Wood Diameter | 200mm |
| Max Opening | H x W = 210 x 265mm |
| Operation | Return/forward/stop of feed rollers through operating bar (yellow) |
| Stress Control System | TP Pilot for Automatic feeding |
| Chipper Principle | Disc |
| Cutting Angle | 90 degrees |
| Hopper Placement | Parallel |
| Feed Rollers | 2 Horizontal hydraulic rollers |
| Rotordisc – Diameter | 760mm with changeable end sections of ejector wings |
| Rotordisc – Weight in kg | 168 |
| Number of Knives | 3pcs. |
| Chip Size | 4-10mm (hydraulic adjustable) |
| Anvil/Counter Steel | 1 Horizontal and 2 Vertical |
| Power Required | 30-85kw (40-115hp) |
| PTO RPM | 540 rpm or 1,000rpm/min. |
| PTO Shaft | Walterscheid 2400 series with freewheel, length = 560mm |
| 3-Point Linkage | Category 1 |
| Chip Capacity | 6-8 m³/hour (Experience numbers by manual operation) |
| Weight | 700 kg |
| Tool Kit | Yes |
| Extra Equipment | |
| Speed Up Gear | Increases the rpm of the tractor from 540 rpm to 1,000 rpm |
| Extended Ejector Spout | 500 mm vertical • 335 mm vertical • 1,000 mm horizontal |
| Silverbreakers | Type A or B – are used if extra requirements for chip quality is needed |
| Light Bar | Light bar with complete set of rear lights |